Loading...
Serving Coeur d'Alene, ID and surrounding areas. (208) 415-4190
A brick wall is only as good as its footing. We build garden walls, privacy walls, and decorative masonry that stand through North Idaho winters without leaning, cracking, or crumbling.
Brick wall installation in Coeur d'Alene starts with a concrete footing poured below the frost line, followed by coursed brick laid in mortar with correct bond pattern and joint tooling, most projects from start to finish take two to five days.
The footing is what most homeowners never see but what determines whether a wall stays plumb for fifty years or starts leaning in five. In North Idaho, frost depth matters - a footing that does not go deep enough will heave every winter. We set footings at the correct depth on every job, whether the wall is decorative or load-bearing.
Brick walls pair naturally with other masonry work. Many of our customers combine a new wall with stone masonry accents or brick repair on existing structures nearby to get a consistent look across the property.
A wall that is no longer plumb is usually a footing or drainage problem. Water accumulating behind the wall puts lateral pressure on it. A leaning wall is a safety risk and will get worse without intervention.
Mortar erodes faster than brick. When joints are hollow or missing, water gets behind the face brick and freeze-thaw cycles pop bricks off the wall. Catching mortar deterioration early saves the brick itself.
Spalling - where the face of a brick flakes off - is caused by moisture trapped inside the unit freezing. It usually means the mortar joints have been failing for a while. Spalled bricks need replacement, not just repointing.
White salt deposits on the surface signal that water is moving through the wall, dissolving minerals, and depositing them on the face. It points to a drainage or moisture problem that needs to be addressed to stop ongoing damage.
We install new brick walls for residential and light commercial properties. Our most common projects are garden and landscape walls, privacy and boundary walls, decorative entry walls, and planter surrounds. We also build brick columns to anchor fence panels or gates. Every project starts with a proper concrete footing, correctly mixed mortar, and capping course to protect the top of the wall from water infiltration.
In addition to new construction, we rebuild and repair existing walls. If your wall is leaning, has sections with missing brick, or has mortar joints that have eroded away, we can assess whether section-by-section repair or full rebuilding is the better approach. For isolated mortar issues, our stone masonry and brick repair teams handle targeted work as well.
Great for homeowners who want to define beds, terraces, or property boundaries with a durable masonry finish.
Taller walls built for visual screening or sound reduction, requiring engineered footings and proper drainage design.
Curb appeal upgrades that frame a driveway, walkway, or gate with solid masonry that matches the home.
Low walls that contain soil for raised planting beds while looking finished and intentional in the landscape.
The Coeur d'Alene area has a climate that tests masonry hard. Ground freezing and thawing through the winter months creates movement in the soil that can push inadequately founded walls out of plumb over time. Getting the footing depth right, selecting mortar mixes rated for cold weather, and designing adequate drainage behind taller walls are all things that matter in this climate and that we address on every job.
We regularly install brick walls for homeowners in Hayden Lake and Rathdrum. Whatever the neighborhood, our approach is the same: do the prep work correctly so the wall outlasts the rest of the landscape.
Call us or use our contact form. We respond within one business day to schedule your free estimate. No waiting weeks for a callback.
We visit your property, discuss height, length, brick type, and design. You receive a written estimate before we schedule any work.
We excavate to the correct frost-line depth, form, and pour the concrete footing. Proper cure time is built into the project schedule before we start laying brick.
We lay brick course by course, tool the joints, install the cap, and clean up completely before we leave. Most projects finish in two to five days total.
Free estimates, written quotes, no surprise charges. We reply within one business day.
(208) 415-4190We have been building and repairing brick walls in the Coeur d'Alene area since 2015. We know the frost depths, soil conditions, and drainage patterns that affect wall longevity in North Idaho - and we build to those realities on every job.
Every wall we build starts with a footing poured below the local frost line. This is the single most important factor in whether a wall stays plumb for decades or starts leaning after a few winters. We do not cut corners on this step.
We provide a written estimate before any work starts. The price you approve is the price on the invoice, unless you request a scope change. No hidden fees, no change orders without your approval.
We build to industry best practices published by the Brick Industry Association, covering mortar selection, bond patterns, drainage, and capping. Following these standards is how we produce walls that hold up in variable climates like ours.
We bring the same attention to footing depth, mortar quality, and drainage on every brick wall project. When you hire us, you get a wall built correctly the first time.
Add natural stone accents or full stone wall sections to complement your brick installation.
Learn MoreRepair spalled bricks, replace damaged courses, and restore existing brick walls before problems spread.
Learn MoreCall or fill out our form now. The sooner a leaning or failing wall is assessed, the less it costs to fix.